Search
SHOP CATEGORIES
    Menu Close

    APEXi Smart Accel Controller

    SKU: APX-410A001
    Manufacturer: Apexi

    $279.00
    $197.00
    i h

    *Fast Shipping *Buy Now and Pay Later

    *Authorized Dealer *Safe Purchases

    *Outstanding Customer Service A+++

    A'PEXi Original Accelerator Controller with 7-modes (3 ECO Modes, 2 Boost Modes, Lo-Throttle Mode, and Hi-Throttle Mode)

    FUNCTION
    The A'PEXi SMART Accel Controller offers instant and direct throttle response for vehicles equipped with Electronic Throttle Control (ETC) Systems. Throttle response that is delayed from ETC or better known as Drive-by-wire throttle is greatly improved with this simple unit and a vehicle specific plug and play harness installation which is connected between the factory accelerator pedal sensor and wiring harness within a few minutes.

    PRODUCT FEATURES
    [ECO Mode]
    There are 3 ECO Mode options. Throttle response time will delay compared to factory throttle simulating the accelerator pedal being pressed gently which can result in fuel economic efficiency due to decreased initial load from the output of the accelerator pedal, in some cases can reduce fuel consumption by up to 10%. The ECO Mode can also be used to desensitize vehicles with abrupt throttle response from the factory, as seen on some vehicles such as the Toyota Tundra Truck.

    [Lo-Throttle Mode]
    Throttle response will delay from normal mode based upon throttle pedal percentage range. Throttle will react to how the user presses on the pedal between idle-to-full throttle range.

    [Boost Mode]
    Throttle response time will become quicker and results in improved accelerator pedal feel. Returns to normal mode once pedal is pressed to fully open throttle.

    [Hi-Throttle Mode]
    Improved throttle response based on throttle percentage range, in this mode throttle will respond as if depressing the pedal in full throttle. Returns to normal mode once pedal is pressed to fully open throttle.
    - Reverse-Gear cancel harness is an added safety feature that is an installation option to revert to factory throttle setting when reversing vehicle
    - Full-Color A'PEXi Logo LED Switch in 7 different colors per mode

    SPECS:


    ITEM NOTES:
    SMART Accel Controller Harness


    VEHICLE NOTES:

    PRODUCT SPECIFICATIONS

    Part Number 410-A001
    Electronics Model Compatibility SMART Accel Controller
    Setting Parameters 7 Setting Modes: (3 ECO Modes, 2 Boost Modes, Lo-Throttle Mode, and Hi-Throttle Mode)
    Special Notes Requires SMART Accel Controller Vehicle Specific Harness for installation and use. (+$70.00)


    APPLICATIONS:

    SCION FR-S -ALL
    SUBARU BRZ -ALL

    0.0 0
    Write your own review Close
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    A'PEXi Original Accelerator Controller with 7-modes (3 ECO Modes, 2 Boost Modes, Lo-Throttle Mode, and Hi-Throttle Mode)

    FUNCTION
    The A'PEXi SMART Accel Controller offers instant and direct throttle response for vehicles equipped with Electronic Throttle Control (ETC) Systems. Throttle response that is delayed from ETC or better known as Drive-by-wire throttle is greatly improved with this simple unit and a vehicle specific plug and play harness installation which is connected between the factory accelerator pedal sensor and wiring harness within a few minutes.

    PRODUCT FEATURES
    [ECO Mode]
    There are 3 ECO Mode options. Throttle response time will delay compared to factory throttle simulating the accelerator pedal being pressed gently which can result in fuel economic efficiency due to decreased initial load from the output of the accelerator pedal, in some cases can reduce fuel consumption by up to 10%. The ECO Mode can also be used to desensitize vehicles with abrupt throttle response from the factory, as seen on some vehicles such as the Toyota Tundra Truck.

    [Lo-Throttle Mode]
    Throttle response will delay from normal mode based upon throttle pedal percentage range. Throttle will react to how the user presses on the pedal between idle-to-full throttle range.

    [Boost Mode]
    Throttle response time will become quicker and results in improved accelerator pedal feel. Returns to normal mode once pedal is pressed to fully open throttle.

    [Hi-Throttle Mode]
    Improved throttle response based on throttle percentage range, in this mode throttle will respond as if depressing the pedal in full throttle. Returns to normal mode once pedal is pressed to fully open throttle.
    - Reverse-Gear cancel harness is an added safety feature that is an installation option to revert to factory throttle setting when reversing vehicle
    - Full-Color A'PEXi Logo LED Switch in 7 different colors per mode

    SPECS:


    ITEM NOTES:
    SMART Accel Controller Harness


    VEHICLE NOTES:

    PRODUCT SPECIFICATIONS

    Part Number 410-A001
    Electronics Model Compatibility SMART Accel Controller
    Setting Parameters 7 Setting Modes: (3 ECO Modes, 2 Boost Modes, Lo-Throttle Mode, and Hi-Throttle Mode)
    Special Notes Requires SMART Accel Controller Vehicle Specific Harness for installation and use. (+$70.00)


    APPLICATIONS:

    SCION FR-S -ALL
    SUBARU BRZ -ALL

    Customers who bought this item also bought
    Picture of APEXi  Smart Accel Controller Harness - 2013-2020 BRZ/FR-S/86

    APEXi Smart Accel Controller Harness - 2013-2020 BRZ/FR-S/86

    For 2013-2020 Subaru BRZ, Scion FR-S, and Toyota 86
    $70.00 $59.00
    Picture of Hawk HPS Brake Pads - Front Subaru BRZ / Scion FRS
    Picture of Hawk HPS Brake Pads - Rear Subaru BRZ / Scion FRS
    Picture of EcuTek Bluetooth Vehicle Interface Kit

    EcuTek Bluetooth Vehicle Interface Kit

    *DOES NOT INCLUDE DONGLE FOR TUNING*
    $249.00 $210.00