Search
Shop Categories
    Menu Close

    Perrin Cold Air Intake FRS/BRZ/86

    SKU: PSP-INT-330
    Manufacturer: Perrin
    *
    $350.00
    $297.50
    i h

    *Fast Shipping *Buy Now and Pay Later

    *Authorized Dealer *Safe Purchases

    *Outstanding Customer Service A+++

    Add horsepower and style under your hood with a PERRIN BRZ/FR-S Cold Air Intake. The PERRIN BRZ/FR-S intake has been designed with proper MAF alignment and tubing size to maintain proper air fuel ratios, eliminating engine bogging and preventing Check Engine Lights that plague competitive systems.

    The PERRIN Performance intake system places the air filter behind the front bumper, away from the hot exhaust header and radiator to constantly draw cool fresh air. Many competitors leave their air filters under the hood or rely on the factory scoop to push air over the filter. There systems ingest warmer air and simply create less horsepower.

    During normal driving the PERRIN intake sounds relatively stock, but under load it really comes to life adding a throaty, deep growl, demanding attention and alerting people that your car is undeniably modified with an additional 5hp this intake provides to a stock car.

    PERRIN intake systems are powder coated with a wrinkle finish to match your other PERRIN FR-S / BRZ parts. Each system is available in either red or black. 

    Constructed from CNC mandrel bent aluminum tubing the PERRIN intake system features smooth bends, and a perfectly placed CNC machined MAF bung. A performance "pinch" in the tubing allows the PERRIN intake to pass through the engine bay without any cutting or trimming.

    Vehicle Fitment:

    • 2013-2016 BRZ - Yes
    • 2013-2016 FR-S - Yes
    • 2017-2018 BRZ Automatic - Yes
    • 2017-2018 86 Automatic - Yes
    • 2017-2018 BRZ Manual - No
    • 2017-2018 86 Manual - No
    4.6 5
    Write your own review Close
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    John | 8/29/2013 5:00 PM
    Great all around
    Love the product - better throttle response, easy install, sounds fantastic (3-4k rpms best), looks very good in the engine compartment.

    As for customer service, couldn't be happier - showed up on my doorstep fast, was a really easy transaction for a great product.  Very happy.
    Was this review helpful? Yes No (0/0)
    Ben | 4/20/2014 5:00 PM
    Easy!
    Easy install, Great gains! plus my MPG went up!
    Was this review helpful? Yes No (0/0)
    Richard | 3/28/2015 5:00 PM
    Amazing sound! Definitely worth it.
    This perrin intake takes the frs to the next level with sound.  Rev matching and rpm over 3k sounds like a new car. The only issue I had was that the bolt they sent to attach the intake to the front bumper was too long. Actually very dangerous, when you tighten the bolt is long enough to reach through the bumper and hit the intake on the other side. I didnt see this, because its goes in the metal bumper and is covered up. I ended up tightening the bolt right into the intake. I thought it caused damage at first, but was lucky it was just indentations and no cracks or holes.  I ended up using another bolt I had that was the same diameter, just shorter.  Beside that one scary moment, the rest was a breeze and definitely don't regret it.
    Was this review helpful? Yes No (0/0)
    Chris | 12/14/2015 4:00 PM
    Amazing sound
    Although installation of this kit requires you to take the front bumper off I would definitely recommend it. The quality is very good as should be expected from Perrin products, everything fit perfectly as the instructions said it would, and finally the sound it makes when you rev the engine is a definitely noticeable change. It makes the car feel and sound more alive in my opinion. Do note that the bolt included to tighten the intake to the frame is a tad too long and will rub on the intake tube if you tighten it too hard, I would just add an extra washer or two to prevent it from rubbing.
    Was this review helpful? Yes No (0/0)
    keola | 10/12/2016 5:00 PM
    Cool sound and good looks
    Was fairly easy to install, just a little time consuming. But very pleased with the fit, finish, look and performance of this intake. Was my first performance upgrade and is making me want to do more.
    Was this review helpful? Yes No (0/0)
    *
    *
    *
    *

    Add horsepower and style under your hood with a PERRIN BRZ/FR-S Cold Air Intake. The PERRIN BRZ/FR-S intake has been designed with proper MAF alignment and tubing size to maintain proper air fuel ratios, eliminating engine bogging and preventing Check Engine Lights that plague competitive systems.

    The PERRIN Performance intake system places the air filter behind the front bumper, away from the hot exhaust header and radiator to constantly draw cool fresh air. Many competitors leave their air filters under the hood or rely on the factory scoop to push air over the filter. There systems ingest warmer air and simply create less horsepower.

    During normal driving the PERRIN intake sounds relatively stock, but under load it really comes to life adding a throaty, deep growl, demanding attention and alerting people that your car is undeniably modified with an additional 5hp this intake provides to a stock car.

    PERRIN intake systems are powder coated with a wrinkle finish to match your other PERRIN FR-S / BRZ parts. Each system is available in either red or black. 

    Constructed from CNC mandrel bent aluminum tubing the PERRIN intake system features smooth bends, and a perfectly placed CNC machined MAF bung. A performance "pinch" in the tubing allows the PERRIN intake to pass through the engine bay without any cutting or trimming.

    Vehicle Fitment:

    • 2013-2016 BRZ - Yes
    • 2013-2016 FR-S - Yes
    • 2017-2018 BRZ Automatic - Yes
    • 2017-2018 86 Automatic - Yes
    • 2017-2018 BRZ Manual - No
    • 2017-2018 86 Manual - No
    Customers who bought this item also bought
    Picture of Valenti Style Reverse Bar Clear w/Red Housing