Description:
Scion FR-S Front Turn Signal Housings offered include built in LED’s….these LED’s are much brighter than the stock turn signals, and are a dramatic improvement in visibility. They also improve the aesthetic appearance of your FR-S…I mean, who wouldn’t want to show off how mean their FR-S looks up front?
These front turn signals sport a very clean, brightly-lit white bar when powered on, which taps into and acts as a secondary parking light. Along with this parking light, your stock turn signal bulbs are replaced by multiple amber LED’s that flash when your turn signals are activated, as well as flash when hazard mode is initiated.
The Scion FR-S Front Turn Signal Installation instructions are included with purchase.
These front turn signal housings are ONLY compatible with the following models:
Scion FR-S
(The Toyota GT86 and the Subaru BRZ front turn signals are located inside of the main headlight housings, and as such, do not have separate front turn signal housings like the FR-S. Therefore, these housings will NOT fit on the Toyota GT86 or the Subaru BRZ.)
These front turn signal housings are available in the following color schemes:
Clear
Smoked Black
These housings are plug and play for the turn signal function (the included plug fits directly in the OEM socket where bulbs would normally plug into)
Custom wiring is needed to enable the white parking light bar included in the housing. All of the custom wiring and wiring taps needed are included in this purchase, as well as the resistors needed to prevent hyperflashing. You can also purchase an option hyperflash relay (which is available at the link below for an additional $15) to prevent the hyperflashing, which means you would NOT have to wire in the included resistors if you decided to go this route.
Note: These turn signal housings are for off-road use only.
SPECS:
Available in clear or smoked black. Plug and play for FR-S only.
ITEM NOTES:
VEHICLE NOTES:
APPLICATIONS:
SCION FR-S 2012-2013
Hyperflash Relay - CLICK HERE