Skunk2 PRO-C FRS Coilovers - 541-12-6500

Roll over to magnify and click to enlarge
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8

Product Reviews

Write Review

  1. Noticeable improvement over stock

    Posted by Gio on Mar 7th 2018

    First time owning and installing a set of coilovers.
    Package arrived at my house in 2 days.
    Easy install, Only issue I ran into was some clunking noise in the rear suspension, which was my error. Went back to tighten up my endlinks and problem solved. I would recommend tightening them a little more than the recommended torque specs.
    New wheels looking good now that I got rid of that wheel gap. Very easy height adjustment and the dampening settings were a plus! Car feels a lot more planted and responsive while cornering.
    Overall very happy with my purchase!

  2. First Time Install

    Posted by Kirk on Dec 11th 2017

    I originally was going to get the Solo Werks S1 Coilovers but I decided on these because of the amazing discounted price.

    I run 18x5 offset 42mm. I didn't like how the wheels sat with the suspension until I put the Pro-C Coilovers on! So this was my first time installing any sort of suspension on a vehicle and I had set myself two days to work on the vehicle in case if I ran into any issues. I can't tell you how many times I lifted my car and lowered it to make sure it was perfect. I would say an extra pair of hands is a must and that you have the required tools available at your disposal, if you have power tools that a plus and it saves stamina.

    I started with the back coils since it was easier to do and if I needed to stop after getting them installed I could still drive the vehicle (didn't have to). As far as how I set them I completely turned the thread until the coilover was completely compressed (bottom) which then made my car very flush (In my opinion). I was able to put almost two fingers under the wheel well. Also I tightened the springs a bit because I wanted a stiffer ride (all preference).

    For the front I did it a little different. I measured about 1" of thread poking out of the bottom for a good baseline. Also, I tightened the spring to be a stiffer ride (all preference). The end result for the front was being able to put 1 finger underneath the wheel well.

    As far as both tires went there was maybe half inch of poke from the sides which is barely noticeable! I love the end result though! I will say take your time if this is your first install of coilovers.

  3. Champagne Coilovers for Soda pop money!

    Posted by Chris on Apr 14th 2016

    Although i was unsure at first, I took the plunge because of the features that these included at the pricepoint. The Coilovers offer a great street feel and stiff enough for spririted driving or light competition use. Easy to install, and they get LOW for hard parking at the shows too. I just Wish I could control the dempening from inside the car. Overrall a Great Buy!

  4. great coilover

    Posted by Unknown on Jan 25th 2015

    These coilovers are extremely comfortable and functional. The adjustability is great!

  5. Excellent Fit and Finish! Very Good Customer Service!

    Posted by Canyon King on Aug 21st 2014

    I received these as part of a group buy, and got an unbelievable deal.
    the quality of parts and install were great. After having a few different brands of coilovers, I feel like Goldilocks and the three bears, This one Feels Just Right! Not like driving a sofa, but not like riding on bricks. Thanks Guys!

*Product Videos

Skunk2 BRZ/FRS Coilovers 02:19

Meet Michael, These are the first Set of Skunk2 Coilovers installed on a customers car in the US. When we first got these our first impression was that the quality on the build and the materials used are top knotch. Watch the video for more info or contact us. http://www.fteightysix.com/new-products/frs-brz-pro-coilovers-skunk-2/#.VByUc_mwL3M

  • Skunk2 BRZ/FRS...
    Meet Michael, These are the first Set of Skunk2 Coilovers inst...
$1,274.00 $1,059.00
(You save $215.00)
Brand:
Skunk2
SKU:
SK2-541-12-6500
Shipping:
Calculated at checkout
Condition:
New


Product Description

Skunk2’s industry-leading Pro-C Coilovers for the BRZ/FRS feature 12-way adjustable valving, adjustable ride height, and a state-of-the-art mono-tube design. Thanks to threaded shock bodies, Pro-C Coilovers offer height adjustments independent of spring preload, which results in significant ride-height changes without sacrificing shock travel or ride comfort. Quick and precise ride-height adjustments can be made for dialing in corner balancing as well as for improved handling, responsiveness, and overall balance. Skunk2’s track- and street-tested Pro-C shock valving offers the perfect balance between daily driving and track performance and its all-new, shortened shock bodies and reduced shaft strokes help maintain adequate suspension travel on lowered vehicles for improved performance without sacrificing comfort.

Pro-C Coilovers feature vehicle-specific, carefully selected springs designed to dramatically improve handling, and a race-inspired, mono-tube design for superior performance. Skunk2’s micro-polished, mono-tube design and one-piece, forged shock bodies, combined with its precision-machined, oversized shafts and stainless steel pistons, ensure that each Pro-C Coilover is both responsive and durable. Each Pro-C Coilover also features the highest quality shock oil for consistent performance and triple upper and lower seals to ensure years of leak-free operation. The results are unmatched cornering grip, reduced body roll, and a feel of vehicle control and stability like no other.

Pro-C Coilovers feature hard-anodized, CNC-machined, forged 6061-T6 aluminum spring perches and CNC-wound racing springs manufactured from high-quality, SAE9254V spring steel. Each spring is designed to optimize the balance between comfort and performance and is custom-matched to their respective shocks. Pro-C Coilovers offer ride-height adjustments as low as three inches for an aggressive and sporty appearance.

Just like the entire Pro Series lineup, Pro-C Coilovers set the benchmark for suspension performance. Similar to how Skunk2’s Pro Series Camshafts and Valvetrain revolutionized Honda engine performance, its fully adjustable, Pro-C Coilovers do just that for enthusiasts who are looking for high-performance suspension components at an affordable price. Based on more than 15 years of racing and suspension tuning experience, Pro-C Coilovers feature the same technology Skunk2 uses on its own championship-winning road racing and drag racing cars.

Like all Skunk2 products, Pro-C Coilovers feature a one-year warranty and are designed to provide years of enjoyment for the life of your vehicle. Never wait for a coilover rebuild again; Skunk2 stocks large quantities of replacement dampers that, in most cases, cost less than a typical coilover rebuild. Purchase your replacement dampers directly from Skunk2 to minimize downtime.
 

 

General Description

Skunk2’s Pro Series Coilovers are based on more than 15 years of racing and suspension tuning experience. The advanced technology we’ve employed through our road racing and drag racing efforts is applied to every Pro-S II and Pro-C Coilover system. Our track- and street-tested valving offers the perfect balance between daily commuting and spirited, performance driving. Pro Series Coilovers feature mono-tube construction, shortened shock bodies, and reduced shaft strokes in order to maintain adequate suspension travel on lowered vehicles for improved performance and comfort. Pro Series Coilovers also allow for quick and precise ride-height adjustments for improved handling response, cornering ability, stability, and balance.

 

SPECS:



ITEM NOTES:
Spring Rates (Front/Rear): 6 kg/mm / 6 kg/mm 
Minimum Drop 1", Maximum Drop 3.5"

VEHICLE NOTES:


APPLICATIONS:
FRS/BRZ/GT86

 

Read more about it here -BLOG POST